Pulsafeeder DC3 Guía para resolver problemas descargar pdf (Pagina 14)

72-001-02 Rev A

 Clean inside the diaphragm chamber (item#33) and the head body (item#21),

especially along the diaphragm pinching zone

 Before screwing on the new diaphragm, apply grease on diaphragm locking

screw (threaded end of the slide item#102)

 Screw on the diaphragm (item#32) make sure it reaches the edge on the slide

(item#102)

 Reassemble the pump head (item#21) following in reverse these instructions and

refers to the figures about the type of pump

 Fix the pump head by means of the locking screws (item#29); see section 6.2

"fastener inspection"

Figure 7

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

Sin comentarios

Pulsafeeder DC3 Guía para resolver problemas Pagina 14