Pulsafeeder MPC Manual de usuario descargar pdf (Pagina 31)

10. Input/Output Setup

Use the “DIGITAL I/O” menu to activate the functions required for the intended

application.

Users may also reference Section 14 – Menu Maps for additional configuration

assistance

10.1 Analog Input Setup

Use the “ANALOG I/O” menu to activate the analog input signal function.

The menu can be used to set the analog input to either ACTIVE or

INACTIVE.

10.2 Digital Input Setup

Each of the 2 Digital INPUTS can be selected as:

Inactive

Leak Detection

Tank Level Input

Remote ON/OFF Input

Flow Detection (delay time must be set)

Each can be set as normally OPEN or normally CLOSED. For example,

if an input is set to ON/OFF and NORMALLY CLOSED, this means a

CLOSED switch will activate the pump. A NORMALLY OPEN setup will

give the opposite response.

10.3 Analog Output Setup

Use the “ANALOG I/O” menu to activate the analog output signal

function.

The menu can be used to set the analog output to either ACTIVE or

INACTIVE.

10.4 Digital Output Setup

Each of the 3 Digital OUTPUTS can be selected as:

Inactive

ON/OFF Status

AUTO/MAN Status

Stroke Indicator (Pulse Output)

Alarm Indicator

Leak Detection Status

Tank Level Status

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 55 56

Sin comentarios

Pulsafeeder MPC Manual de usuario Pagina 31