Pulsafeeder Pulsar Series HypoPump2 Manual de usuario descargar pdf (Pagina 12)

6. Remove outer spring from Core Assembly (Seal Kit Assembly) and pull Core Assembly out.

7. Inspect Valve Body for O-rings that may have been left in and remove.

8. Remove the sleeve from the Core Tube and remove the O-ring.

9. Locate parts from the Seal Kit.

Locate and remove

both O-rings

Inspect Seal Kit parts and

insure the small spring is

in the core.

CAUTION: Do not unscrew any part

of the seal kit during inspection or

reassembly. Any change in length

will affect valve performance.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 26 27

Sin comentarios

Pulsafeeder Pulsar Series HypoPump2 Manual de usuario Pagina 12