Pulsafeeder Pulsar Series HypoPump2 Manual de usuario Pagina 21

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 27
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 20
17
The existing top two holes in the rib of the gear box will line up with the holes in the electrical enclosure.
Use a 3.0 mm Allen wrench to tighten the mounting screws, and a 9 mm open end wrench for the nuts.
Vista de pagina 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27

Comentarios a estos manuales

Sin comentarios