Pulsafeeder Pulsar Shadow Manual de usuario descargar pdf (Pagina 19)

5. Equipment Startup

PULSAR SHADOW

PUMP USE TWO SEPARATE OILS: PULSALUBE 9M OIL FOR THE

ECCENTRIC BOX AND

PULSALUBE 8G, GEAR OIL FOR THE GEARBOX. CONFUSION

BETWEEN THE TWO REDUCES PERFORMANCE OF THE PUMP

5.1 Oil Capacities

Pulsalube 9M lubricating oil is available in 950 ml (1 quart) containers.

Pulsalube 8G gear oil is available in 200 ml (.21 quarts) or 950 ml (1 quart) containers.

It is recommended that adequate supplies of both PULSAlube oils be on hand for periodic

changes and emergency requirements. The approximate amounts of oil required to fill PULSAR

Shadow

pumps to specified levels are:

Eccentric Box, all Gearbox, Model 25B Gearbox, Model 55B

Eccentric Oil, No. 9M

950 ml (1 Qt) -- --

Gear Oil, No. 8G

-- 150 ml (0.16 Qt) 200 ml (0.21 Qt)

5.2 Eccentric Oil Fill

Fill the eccentric box with oil by removing the manual cover assembly or DLC/M or ECA

controller if so equipped. Fill with the proper oil (Pulsalube 9M) to the upper edge of the

crosshead assembly and return spring(s) or slightly above. Replace the cover or controller. Take

care not to disturb the stroke length setting when reinstalling. See figure 12.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 47 48

Sin comentarios

Pulsafeeder Pulsar Shadow Manual de usuario Pagina 19