Pulsafeeder Pulsar Shadow Manual de usuario descargar pdf (Pagina 32)

7.6 Cover Assembly

7.6.1 Removal and Reinstallation

Figure 21

The hand knob linkage employs a slip type coupling which can be reassembled in either of two

rotational orientations 180

apart from one another: therefore, the original orientation must be

retained for reassembly so that pump calibration is retained.

7.6.2 Removal

1. Adjust the stroke length until the dial indicator is set at the zero stroke setting. Adjustment is

easier with the drive motor running. Allow the locking mechanism to engage to the nearest

detent

2. Disconnect the power source to the drive motor.

3. Remove the cover screws.

4. Using care not to rotate the adjustment shaft, remove the cover vertically from the eccentric

box.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 47 48

Sin comentarios

Pulsafeeder Pulsar Shadow Manual de usuario Pagina 32